Anti-Rutsch-Band verformbar
The deformable anti-slip tape consists of a mineral granulation embedded in synthetic resin, which produces a very strong slip resistance R13 according to DIN 16165 and is almost exclusively suitable for street and work shoes. Compared to normal anti-slip tapes, this special tape has a flexible aluminum carrier foil, which was specially developed for uneven surfaces (e.g. checker plate or tear plate). For optimum results, however, the structure of the substrate has to be not too fine and close-meshed. Another advantage: due to the low-corrosion carrier foil made of aluminum, this anti-slip tape can even be used outdoors.Important: We would like to point out that frost can attack the tape under certain circumstances and the service life of the adhesive and material will be shortened accordingly. For this reason, permanent bonding should ideally only be carried out in areas protected from the weather (e.g. covered entrance steps) and during frost-free months. The application temperature must be at least 12 °C, both from the air and from the surface to be bonded. In addition, we recommend the use of an edge sealer in outdoor areas and, depending on the surface, possibly also a primer.
Advantages
- Universal roll material: For individual cutting to size
- Moldable and adaptable: Flexible aluminum backing
- Suitable for indoor and outdoor use
- Extra rough and non-slip: ideal for footwear
- Tested slip protection: R13 according to DIN 16165
- Easy and quick to mount: Thanks to self-adhesive back
Application area
- Stairs, ladders, ramps, entrance areas, foyers, terraces, bridges, footbridges, loading platforms, fork-lift trucks, high-speed trucks, cranes, construction machines, lifting platforms, machine stands, workplaces, police vehicles, fire-fighting vehicles, rescue vehicles, ambulance vehicles, rail vehicles, airplanes, helicopters, ships, yachts, boats, etc. in public administration buildings, commercial buildings, industrial and storage halls, vehicle and machine construction, etc.
- Strong adhesive: adheres to almost all smooth surfaces (e.g. wood, stone, metal, plastic, etc.)
- Recommended for indoor and outdoor use
Mounting
- clean the substrate with alcohol-based cleaning agents
- Printed, detailed assembly instructions are supplied with the product
- Self-adhesive and very easy to apply: Simply peel off the protective film on the back and stick on. No milling, no dirt and dust!
If you have any questions or comments, please do not hesitate to contact our customer service! You can reach us by e-mail atinfo@antirutschstreifen.de or by phone at +49 36602 2891 30.
